Which Construction Adhesive is Best? Let's find out!

Loading...
  • Published on: 08 July 2019
  • Which construction adhesive is best? A total of 10 construction adhesives tested in 2 videos. This video: Flex Seal, Gorilla, 3M 5200, F-26, and Red Devil (not designed for continuous water exposure) and JB Weld tested in 2 out of 4 events. Next video: Liquid Nails Heavy Duty, Liquid Nails Fuze It, Loctite PL 8X, Loctite PL 3X, and DAP Dyna Grip. Unsponsored content 100% of the time to ensure unbiased testing to help consumers select the best products, saving them time and money! Thank you VERY much for all the video ideas you all suggest, including this one and thanks for all of the positive comments as well!

    Thank you very much for supporting the channel by watching the commercials and through Patreon support. https://www.patreon.com/projectfarm

    This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
  • Runtime : 14:57
  • Liquid nails loctite loctite 3x loctite 8x loctite pl 8x loctite pl 3x dyna grip DAP Dyna Grip Flex Flex Seal Red Devil 3M 3M adhesive sealant 3M 5200 F-26 F26 Gorilla Loctite Fuze It Project Farm JB Weld JB Weld Original Lets find out! Let's find out! adhesive construction adhesive liquid nails liquid nails fuze it liquid nails heavy duty liquid nails adhesive how to use construction adhesive how to use building adhesive best adhesive

COMMENTS: 40

  • Padraic McGuire
    Padraic McGuire   1 days ago

    All of the adhesives, but for the epoxy 2part are urethane based. Urethane adhesives need a bit of moisture to cure. The reason they most all did poor on the pvc is that the pipe, being hydrophillic, could not provide the water molecules to trigger the cure. There is something different about the 3M chemistry that seems to be able to cure even when moisture levels are near 0!

  • SD com
    SD com   2 days ago

    I did not see Loctite in this trial. I will never buy Gorilla Glue products. They failed multiple times. Their only good side is the ads.

  • Loqman AYACHE
    Loqman AYACHE   3 days ago

    T'y big men you are the best πŸ‘ŒπŸ‘

  • Roy Niswanger
    Roy Niswanger   4 days ago

    Subscribed, love your channel. Please do a thorough test with HDPE (HDPE to HDPE adhesion) using adhesives such as 3M Scotch Weld and Loctite 3035 etc etc. Thank you.

  • 25bille
    25bille   5 days ago

    Foam vs concrete which one is better for installing fence post. I don't know that is why I need you to find out. Thanks!!

  • FlyCaster
    FlyCaster   6 days ago

    3M 5200 has been used in marine environments for years. Great product!

  • David Brogan
    David Brogan   1 weeks ago

    3M products have always been impressive.

  • johnnythomson11
    johnnythomson11   1 weeks ago

    Great Channel! I noticed GOOP is shown in the middle of the display of adhesives, but was not tested. Was there an issue with using Amazing Goop? I've used this product quite a bit and was really hoping it would be tested.

  • Jacob Daniels
    Jacob Daniels   1 weeks ago

    Would like to see the a comparison of silicone sealants!! Silicone/thru the roof/lexel and others!

  • Taylor Bertrim
    Taylor Bertrim   1 weeks ago

    Shoot most of the time you have one of the products I use, but no LePage PL Premium. Awesome videos though, not complaining.

  • archechme
    archechme   1 weeks ago

    I have never seen a YouTube channel who puts so much effort in to stuff like this. I don't need this knowledge, it doesn't really apply to me right now but I know if I ever need any strong adhesive, I know to go for 3M. Although, I know 3M is well renowned for its adhesive, especially it's VHB tape. Thanks a lot Project Farm, your videos are interesting even if they don't apply to many of your viewers.

  • Martin DeLoach
    Martin DeLoach   1 weeks ago

    Instead of soaking with water, soak with gas, JB weld has issues with that kind of chemical exposure, at least I tried patching a gas tank with JB weld on a 87 Chevy, it leaked 2 days later.

  • OBK
    OBK   1 weeks ago

    So jb weld and duct tape And I can survive the apocalypse apparently

  • BTraine Ztraine
    BTraine Ztraine   1 weeks ago

    I like your videos however you got to be less dry with the numbers and just trying to get to the point faster. Mimi make a second video that you can link that goes over the numbers of people care about that but for most people we just want the results not so much the accounting of it

  • aknighttrain
    aknighttrain   1 weeks ago

    Suggestion : since the wood failed before the adhesive, we really don't know what the actual numbers are.How about using simple clamps on both ends of the boards instead of through-bolts? There are clamps with teeth, if smooth jawed clamps still can't hold against your winners there.

  • Steve
    Steve   1 weeks ago

    I bet this caused Gorilla glue stock to go down and JB Weld stock went up! LOL!

  • TheDefiance76
    TheDefiance76   1 weeks ago

    A coworker one time prepped an area of a barge I needed to do some welding in on a Friday so that Monday morning I could travel out and get right to welding ,,, well not only did that knucklehead torque down every one of the bolts instead of putting a handful full back on , he used 5200 around the entire circumference 😠 it took me hours of beating and prying to get the hatch open ! I'm pretty sure it took 10 years off my life πŸ˜‚

  • Chris Craus
    Chris Craus   1 weeks ago

    Thanks again man. I learn a lot from your channel.

  • Gino Asci
    Gino Asci   1 weeks ago

    why 3M? it looked like JB Weld did much better at 493 pounds.out of curiosity could you redo a challenge between just the two, JB Weld and 3M pull test and really bolt onto the wood and see how much higher than 461 lbs they can withstand?

  • Pileits
    Pileits   2 weeks ago

    Thanks a lot for all your hard work reviewing all the products that I notice you test. Like others here I've made "informed purchases" based on video's you've made HERE on YouTube.

  • Jesus Barajas
    Jesus Barajas   2 weeks ago

    If only my last relationship was as strong as JB Weld πŸ˜’πŸ€¦β€β™‚οΈ

  • Rodney Johnston
    Rodney Johnston   2 weeks ago

    You forgot 3.M windshield glue. It will not all apart

  • Eli Jackson
    Eli Jackson   2 weeks ago

    I look out for 3M, they make good products.

  • Ernest Adkins
    Ernest Adkins   3 weeks ago

    I would like to see which sealant maintains it's original integrity in a high amonia environment with a minimum of 25ppm to a maximum of 50ppm in an enclosed atmosphere. The walls are pressure treated plywood.

  • jdsd744
    jdsd744   3 weeks ago

    You should do a video on whether or not catalytic converter cleaners work. There is cataclean, the laquer thinner method, and others. This could save people thousands in parts, as it's one of the harder to replace parts if you dont have a bolt on converter.

  • Greg Kimura
    Greg Kimura   3 weeks ago

    I've never tried 3M 5200 due to the cost. For wet applications, it's clearly the winner and a product I'll be trying in the future. Thanks for the video!

  • The3rdID
    The3rdID   3 weeks ago

    How is there so much variance between the same products? Does that really mean I could use it and not know if its gonna hold 800lbs or 1800lbs?

  • Jacob Johnson
    Jacob Johnson   4 weeks ago

    For the last test when adhering to a smooth surface you should scratch the smooth surface for better adherence unless there is an aesthetic reason not to scratch it up.

  • justincc87
    justincc87   4 weeks ago

    Randomly needed to buy conduction adhesive and remembered watching this video several months ago. Revisiting it before going to Home Depot. Thanks Project Farm!

  • Steve Richmond
    Steve Richmond   4 weeks ago

    Hmmm how about JB Weld vs actual weldingπŸ€”πŸ™ƒ

  • maggs131
    maggs131   1 months ago

    JB weld is awesome stuff. I wish it could fix my life

  • Alex Grant
    Alex Grant   1 months ago

    Being from Scotland we dont get any cool products like JB Weld or 3M, unless you want to get it shipped over which is a pain if you are in a hurry. I will get some sent over just incase..........

  • De-bodgery
    De-bodgery   1 months ago

    I didn't see 2 things here...No SikaflexGlue to concrete. These adhesives get used for applying wood to concrete all the time.

  • JAYJAYJAY53
    JAYJAYJAY53   1 months ago

    Urethane adhesives are the best but the cleanup is pure hell . I usually use PL brand

  • iluvmysh
    iluvmysh   1 months ago

    Does taping the tips with masking tape help keep the bottles fresh?