How Much Nitrous Can a Stock Engine Take? - Engine Masters Ep. 13

Loading...
  • Published on: 05 September 2016
  • The 13th episode of Engine Masters, presented by AMSOIL, is an unlucky one for a poor little 305ci Chevy small-block. It was the victim of our test of how much nitrous oxide power boost can be tolerated by a completely stock short-block with the original cast crank, rods, and pistons. Yeah, it ends badly, but before the engine's demise we learn a lot, showing you how nitrous oxide increases horsepower and giving you tips on how to use it safely on any engine. You'll also learn a pretty good power combo for a 305 Chevy! Engine Masters is supported by Mr. Gasket and Earl's Vapor Guard.

    Subscribe now to make sure you're in on all the action!
    https://www.youtube.com/subscription_center?add_user=motortrend

    Facebook -http://facebook.com/motortrendmag & http://facebook.com/HotRodEngineMasters
    Instagram @EngineMasters
  • Runtime : 18:59
  • Magazine Nitrous oxide Nitrous NOS Cheater Plate system N2O Noss Spray Juice Two stage Stock short block Stock bottom end Cast Pistons Piston rings Ring end gap 305 Chevy Horsepower Power combo Camshaft 350 horsepower Power test Westech Steve Brule Steve Dulcich David Freiburger Dyno test Engine masters EngineMasters Hot rod HotRod

COMMENTS: 40

  • Isaiah Huse
    Isaiah Huse   22 hours ago

    Oh Nitros the blue stuff that shoots out of your car in games? Yeah totally knew what that was.🤣😅. At least now I know.

  • T C
    T C   2 days ago

    For a 305 they built a strong little motor. Almost 360hp with a factory head and small cam. If they put a Rpm Air Gap on it with a bigger cam, something like a 236/244 on a 108 lsa i bet it would make more peak power and pack more punch mid range from the dual plane and tighter lsa.

  • Jeffs Trouble
    Jeffs Trouble   3 days ago

    So a 350 dollar junkyard 305... 1200 dollar set of heads from jegs.. 300 dollar cam from jegs... 300 dollar intake from jegs... 500 carb from jegs... And 750 dollar starter nitrous kit... Seems like a reliable little engine if you kept it around 450hp/375-380whp. And when you toast it--just do what the LS guys do.... Go back to the junkyard. I'd like to this with a set of FI pistons and crankkit at factory displacement. Probably safely play in the region of 550hp/475-485whp. Be fun in a street cruiser or a ratrod.

  • Aninga32
    Aninga32   5 days ago

    World's Fastest Indian.... Homemade Pistons from Chevy, ford Mustang, and a little bit of titanium alloy.

  • Pigamus Maximus
    Pigamus Maximus   5 days ago

    So what you’re saying is it’s not stock, silly American.

  • Henry Callahan
    Henry Callahan   5 days ago

    dont 305s come with different pistons than these?

  • Jay D Faith
    Jay D Faith   5 days ago

    Should of just slapped turbos on it noz Is rubbish

  • Zach S
    Zach S   6 days ago

    Wdym you call it “N.O.S.” instead of “NOS” are you even a car guy

  • Slam Funk
    Slam Funk   6 days ago

    I have the urge to drink that entire bottle, then play spore for 10 hours, is that normal?

  • Youtubeisbroken
    Youtubeisbroken   6 days ago

    Nitrous isn’t dangers. It’s dangerous in the hands of a child. And the very idea of nitrous turns us all into children.

  • Florida Buzz
    Florida Buzz   1 weeks ago

    I dont like how they didnt go into detail about the gap specs and where more focused on just blowing it up

  • AzraelSilent
    AzraelSilent   1 weeks ago

    Thank you for creating this vid. You delivered exactly what I wanted to see.

  • kaden Eck
    kaden Eck   1 weeks ago

    I’d like to see a rod saw a block in half. Pt. 2?

  • Colt Kolander
    Colt Kolander   1 weeks ago

    That’s such a nice motor to destroy why couldn’t they do that to a junkyard motor

  • v0ffka1
    v0ffka1   1 weeks ago

    Not "more air" but "more oxygen"

  • sp4nrs
    sp4nrs   1 weeks ago

    This show has the most awkward hi fives / handshakes on the internet 😂😂😂

  • Randall Brown
    Randall Brown   1 weeks ago

    Bummer I was hoping for an actual stock motor change the channel

  • 朝倉正樹
    朝倉正樹   1 weeks ago

    It's very useful because there had more cases about NOS Accidents【Street Racing, D1(Drift), Drag Race(0-400/0-1000)】!!

  • Trevor Murphy
    Trevor Murphy   1 weeks ago

    I thought it was a stock engine would be better if you did it with a daily driver

  • Luis Zian
    Luis Zian   2 weeks ago

    That v8 could fit really nice in my q7 ⛽

  • Russ Calligan
    Russ Calligan   2 weeks ago

    O.k. so.. ITS NOT A STOCK ENGINE....its a stock rotating assembly....lets get the facts straight here 1st huh...

  • D KLAHR
    D KLAHR   2 weeks ago

    This show could not be any better.

  • Chris Anderson
    Chris Anderson   2 weeks ago

    "You'll hurt your engine if you just SMACK hit it with the nitrous really hard"Every street kid in the world just said"Pshh...says you"

  • JGD
    JGD   3 weeks ago

    Its either. Factory stock or its modified. Just call it what it is. Waste of a good block. Go get a totalled camry v6 and burn her down propper. ~Turkey lips out

  • JGD
    JGD   3 weeks ago

    Don't let this distract you from the fact that Hector is gonna be running 3 Honda Civic's with spoon engines. On top of that he just came into Harry's and ordered 3 t66 turbo's with NOS's and a Motec System Exhaust

  • Daxx
    Daxx   3 weeks ago

    13:00 momento of the action. 🙌🏻

  • Dave Micolichek
    Dave Micolichek   3 weeks ago

    Wow, that thing pinched a ring within a second. That was ALOT of heat, REAL fast! I thought it would have lasted at least a couple of seconds. If that was a Hyper piston, it probably would have shattered.

  • Clay Dukes
    Clay Dukes   4 weeks ago

    Non of y'all understand that there trying to see how far a stock bottom end will go with no gapping to the rings......its simple just cause its got a good set of heads don't mean nothing